Water tanks play a major role in any residential, commercial, and industrial setup with smooth supply of clean water. However, these tanks, over time, collect sediments, bacteria, and algae in them which harms the quality of water. In order to maintain hygiene and ensure safe consumption, regular cleaning and disinfection are required for the tanks containing water. What, however is the best way to disinfect a water tank properly? Let's check what really gives excellent results-the professional approach.
remove the physical impurities, disinfection will remove all pathogens and thereby make it safe and potable for consumption in everyday life.
The systematic procedure would help a professional cleaning service ensure the water tank is completely sanitized. It would be at its best if a water tank was exposed to successive stages:
Pre-treatment and Drainage 1. For a proper exercise to take place, there must be an assessment of the contamination level and tank soundness. This assessment leads to full draining of the tank for exposure of all surfaces to cleaning.
Most inner surfaces and bottom layers of the water tank become layered with sludges, sediments, and algae. Qualification service individuals scrub surfaces by using special brushes and non-toxic cleaning chemicals. It can remove difficult layers and ensure bacteria infestation won't happen.
It is then hosed with water jets at a high pressure after being scrubbed with hands in order to dislodge and remove any leftover contaminants. This is an important step because dirt, biofilms, and chemical residues cannot easily be scrubbed away.
Once fully cleaned, a food-grade disinfectant is applied to thoroughly kill bacteria, viruses, and fungi. Chlorine-based disinfectants are commonly used because these are effective in killing harmful microorganisms but are safe for human consumption. The disinfectant is left in the tank for some time before being removed to ensure complete effectiveness.
It is then rinsed several times using clean water to remove trace residues of the disinfectant from the tank after disinfection. The tank should be dried before filling to ensure that chemical residues do not contaminate the water.
There is an inspection at the last stage just to ensure that the tank is hygienically and properly cleaned. Even water quality tests may be carried out to confirm health and safety requirements.
provide an immediate solution, but hygiene in the long run requires periodic cleaning and preventive measures. Regular inspections, using covered tanks to prevent external contamination, and installing filtration systems can significantly reduce the risk of waterborne diseases.
Water tank disinfection demands technical know-how, advanced equipment, and the correct cleaning agents. Techniques available in DIY cleaning solutions cannot effectively remove deep-rooted contaminants and harmful bacteria. Professional water tank cleaning services Dubai will offer comprehensive cleaning and disinfection while adhering to health regulations.
Add comment
